This is a 10 gauge half stock percussion fowler from the mid 1800's. It measures 48 1/4" overall with a barrel length of 32". There are no visible British proof marks on the barrel, but I have not been able to remove the barrel to check the underside. The top barrel flat of the octagon portion of the barrel is stamped C WILLMER GRANTHAM. The bore measures out to a 10 gauge shotgun. The bore itself is still fairly bright and has no rust or pitting. The first 7" of the barrel is octagonal then transitions into a round barrel. The exterior has a smooth non pitted surface with a beautiful even plum patina. The barrel has a small bead sight 1/2" back from the muzzle. There is some ornate engraving at the breech. There is a small bit of silver on the barrel where it transitions from octagon to round. The lock plate is marked C WILLMER. It has a barrel matching patina. The action remains very crisp and strong on this one. The hammer and lock plate both have ornate engravings on them. The trigger guard and butt plate are made of iron and have the same look as the rest of the gun. it's obvious this one has been together since day one. The walnut half stock has silver inlays for the single escutcheon. The stock nose cap is made of brass and shows some wear. All three of the ram rod thimbles are securely attached. The stock itself is in very good condition, just the usual bumps and bruises from normal handling. The right side of the stock comb has two small stress cracks, very shallow ones. There is one small piece of wood missing at the butt plate tang. There is some checkering in the wrist area. Overall this is a nice looking imported shotgun from the mid 1800's. If you collect percussion fowling pieces this one would compliment your collection quite well.

Item # AA2583

(Sold)