Mid 1800's 12 Gauge Fowler D.H. Hilliard Cornish, New Hampshire
Item #: AA3449
Click on an image to enlarge
This is a 12 gauge half stock percussion fowler from the mid 1800's by David H. Hilliard. David H. Hilliard was New Hampshire's most prolific individual gun maker of the 19th century. He began manufacturing guns around 1840 and continued on until his death in 1873. During that time span he is believed to have produced around 2500 guns. This half stock fowler measures 58" overall with a barrel length of 42". The top of the barrel is stamped in three lines, D.H. HILLIARD/CORNISH/N.H.. The bore measures out to a 12 gauge shotgun. The bore itself is dark with patches of rust and debris scattered along the entire length of the barrel. The exterior has a smooth non pitted surface with a steel gray and mottled dark patina. The barrel has a small bead sight 1" back from the muzzle. There is some ornate engraving on the breech plug tang. The lock plate is marked 1856/WINDSOR in front of the hammer with a crown behind the hammer. The lock and hammer have a patina matching the barrel. The action remains very crisp and strong on this one. The trigger guard, butt plate, nose cap and escutcheon plates are made of brass and have the same mellow golden patina. It's obvious this one has been together since day one. The walnut half stock is in good condition and shows no repairs or major wood loss. The barrel channel is still pretty crisp, but does show wear from handling. There is one crack in the stock, on the right side between the lock and the barrel tang. The stock presents a nice medium brown appearance. Overall this is a nice looking fowler from the mid 1800's. If you collect early American fowling pieces this one will fit right in.
Shipping Weight:
6 lbs
Item # AA3449
(Sold)
We are currently not accepting on-line orders. If you see something you would like give us a call.